dmesg - Intel Core i5-5200U

Return To Intel Core i5-5200U System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.3-1-ARCH (builduser@tobias) (gcc version 5.3.0 (GCC) ) #1 SMP PREEMPT Fri Feb 26 15:09:29 CET 2016
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bdda6fff] usable
BIOS-e820: [mem 0x00000000bdda7000-0x00000000be210fff] reserved
BIOS-e820: [mem 0x00000000be211000-0x00000000da61efff] usable
BIOS-e820: [mem 0x00000000da61f000-0x00000000da756fff] reserved
BIOS-e820: [mem 0x00000000da757000-0x00000000da779fff] ACPI data
BIOS-e820: [mem 0x00000000da77a000-0x00000000daee9fff] usable
BIOS-e820: [mem 0x00000000daeea000-0x00000000db644fff] ACPI NVS
BIOS-e820: [mem 0x00000000db645000-0x00000000dbafefff] reserved
BIOS-e820: [mem 0x00000000dbaff000-0x00000000dbafffff] usable
BIOS-e820: [mem 0x00000000dd000000-0x00000000df7fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021f7fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: Dell Inc. Latitude 3450/0PW7C8, BIOS A05 04/15/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x21f800 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask 7E00000000 write-back
  1 base 0200000000 mask 7FE0000000 write-back
  2 base 00E0000000 mask 7FE0000000 uncachable
  3 base 00DE000000 mask 7FFE000000 uncachable
  4 base 00DD000000 mask 7FFF000000 uncachable
  5 base 021F800000 mask 7FFF800000 uncachable
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdbb00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fda30-0x000fda3f] mapped at [ffff8800000fda30]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
BRK [0x01b3f000, 0x01b3ffff] PGTABLE
BRK [0x01b40000, 0x01b40fff] PGTABLE
BRK [0x01b41000, 0x01b41fff] PGTABLE
BRK [0x01b42000, 0x01b42fff] PGTABLE
BRK [0x01b43000, 0x01b43fff] PGTABLE
BRK [0x01b44000, 0x01b44fff] PGTABLE
RAMDISK: [mem 0x378f4000-0x37c71fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000EEFB0 000024 (v02 DELL  )
ACPI: XSDT 0x00000000DA75E088 000094 (v01 DELL   CBX3     01072009 AMI  00010013)
ACPI: FACP 0x00000000DA770F98 00010C (v05 DELL   CBX3     01072009 AMI  00010013)
ACPI: DSDT 0x00000000DA75E1B0 012DE1 (v02 DELL   CBX3     01072009 INTL 20120913)
ACPI: FACS 0x00000000DB643F80 000040
ACPI: APIC 0x00000000DA7710A8 000084 (v03 DELL   CBX3     01072009 AMI  00010013)
ACPI: FPDT 0x00000000DA771130 000044 (v01 DELL   CBX3     01072009 AMI  00010013)
ACPI: FIDT 0x00000000DA771178 00009C (v01 DELL   CBX3     01072009 AMI  00010013)
ACPI: MCFG 0x00000000DA771218 00003C (v01 DELL   CBX3     01072009 MSFT 00000097)
ACPI: HPET 0x00000000DA771258 000038 (v01 DELL   CBX3     01072009 AMI. 00000005)
ACPI: SSDT 0x00000000DA771290 000455 (v01 SataRe SataTabl 00001000 INTL 20120913)
ACPI: UEFI 0x00000000DA7716E8 000042 (v01                 00000000      00000000)
ACPI: SSDT 0x00000000DA771730 000C7D (v02 Ther_R Ther_Rvp 00001000 INTL 20120913)
ACPI: ASF! 0x00000000DA7723B0 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
ACPI: SSDT 0x00000000DA772450 00051F (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
ACPI: SSDT 0x00000000DA772970 000B74 (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
ACPI: SSDT 0x00000000DA7734E8 0041AC (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
ACPI: DMAR 0x00000000DA777698 0000B0 (v01 INTEL  BDW      00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021f7fffff]
NODE_DATA(0) allocated [mem 0x21f7f7000-0x21f7fafff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000021f7fffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009cfff]
  node   0: [mem 0x0000000000100000-0x00000000bdda6fff]
  node   0: [mem 0x00000000be211000-0x00000000da61efff]
  node   0: [mem 0x00000000da77a000-0x00000000daee9fff]
  node   0: [mem 0x00000000dbaff000-0x00000000dbafffff]
  node   0: [mem 0x0000000100000000-0x000000021f7fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000021f7fffff]
On node 0 totalpages: 2072770
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3996 pages, LIFO batch:0
  DMA32 zone: 13925 pages used for memmap
  DMA32 zone: 891174 pages, LIFO batch:31
  Normal zone: 18400 pages used for memmap
  Normal zone: 1177600 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xdd800000-0xdf7fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] low level lint[0xb6])
ACPI: NMI not connected to LINT 1!
ACPI: LAPIC_NMI (acpi_id[0x02] low dfl lint[0xc1])
ACPI: NMI not connected to LINT 1!
ACPI: LAPIC_NMI (acpi_id[0x03] dfl res lint[0x0])
ACPI: NMI not connected to LINT 1!
ACPI: LAPIC_NMI (acpi_id[0x04] low dfl lint[0xd1])
ACPI: NMI not connected to LINT 1!
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbdda7000-0xbe210fff]
PM: Registered nosave memory: [mem 0xda61f000-0xda756fff]
PM: Registered nosave memory: [mem 0xda757000-0xda779fff]
PM: Registered nosave memory: [mem 0xdaeea000-0xdb644fff]
PM: Registered nosave memory: [mem 0xdb645000-0xdbafefff]
PM: Registered nosave memory: [mem 0xdbb00000-0xdcffffff]
PM: Registered nosave memory: [mem 0xdd000000-0xdf7fffff]
PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 32 pages/cpu @ffff88021f400000 s92696 r8192 d30184 u524288
pcpu-alloc: s92696 r8192 d30184 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2040360
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8077956K/8291080K available (5738K kernel code, 946K rwdata, 1820K rodata, 1188K init, 1156K bss, 213124K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 64.
	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:8448 nr_irqs:728 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2194.747 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4391.38 BogoMIPS (lpj=7315823)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 6 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 20K (ffffffff81a17000 - ffffffff81a1c000)
ftrace: allocating 22856 entries in 90 pages
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
DMAR: RMRR base: 0x000000db9bb000 end: 0x000000db9c9fff
DMAR: RMRR base: 0x000000dd000000 end: 0x000000df7fffff
DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz (family: 0x6, model: 0x3d, stepping: 0x4)
Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (17565.55 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xdaeea000-0xdb644fff] (7712768 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 16:59:32, date: 03/08/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
dmi type 0xB1 record - unknown flag
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 16 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88021503CC00 0003D3 (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802157CA800 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880215019A00 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xdf800000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf7214000-0xf7217fff 64bit]
pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7200000-0xf720ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf721c000-0xf721c01f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7210000-0xf7213fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:9c98] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf721a000-0xf721a3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7219000-0xf72197ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7218000-0xf72180ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xf7104000-0xf7104fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xf7100000-0xf7103fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.2:   bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:03:00.0: [8086:095a] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xf7000000-0xf7001fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3:   bridge window [mem 0xf7000000-0xf70fffff]
pci 0000:00:1c.4: PCI bridge to [bus 04]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 3 GPEs in block 00 to 7F
ACPI : EC: GPE = 0x27, I/O: command/status = 0x934, data = 0x930
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
e820: reserve RAM buffer [mem 0xbdda7000-0xbfffffff]
e820: reserve RAM buffer [mem 0xda61f000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdaeea000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdbb00000-0xdbffffff]
e820: reserve RAM buffer [mem 0x21f800000-0x21fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [io  0x0680-0x069f] has been reserved
system 00:00: [io  0xffff] has been reserved
system 00:00: [io  0xffff] has been reserved
system 00:00: [io  0xffff] has been reserved
system 00:00: [io  0x1800-0x18fe] could not be reserved
system 00:00: [io  0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io  0x1854-0x1857] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs DLL0631 PNP0f13 (active)
system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:05: [mem 0xf7ff0000-0xf7ffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xdf800000-0xdf9fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xdfa00000-0xdfbfffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xdf800000-0xdf9fffff]
pci 0000:00:1c.0:   bridge window [mem 0xdfa00000-0xdfbfffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.2:   bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3:   bridge window [mem 0xf7000000-0xf70fffff]
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xdf800000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xdf800000-0xdf9fffff]
pci_bus 0000:01: resource 2 [mem 0xdfa00000-0xdfbfffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xf7100000-0xf71fffff]
pci_bus 0000:03: resource 1 [mem 0xf7000000-0xf70fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 3576K (ffff8800378f4000 - ffff880037c72000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd661f000-0xda61f000] (64MB) mapped at [ffff8800d661f000-ffff8800da61efff]
RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
hw unit of domain pp0-core 2^-14 Joules
hw unit of domain package 2^-14 Joules
hw unit of domain dram 2^-14 Joules
hw unit of domain pp1-gpu 2^-14 Joules
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Key type big_key registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.0:pcie04: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1366x768x32, linelength=5504, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90001000000, using 4160k, total 4160k
Console: switching to colour frame buffer device 170x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4 model 0x3D
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Linux agpgart interface v0.103
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x1d
microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x1d
microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x1d
microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x1d
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
  Magic number: 8:720:994
memory memory37: hash matches
rtc_cmos 00:01: setting system clock to 2016-03-08 16:59:32 UTC (1457456372)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1188K (ffffffff818ee000 - ffffffff81a17000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 396K (ffff88000159d000 - ffff880001600000)
Freeing unused kernel memory: 228K (ffff8800017c7000 - ffff880001800000)
random: systemd-tmpfile urandom read with 5 bits of entropy available
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Warning: Keylock active
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.0: debug port 2
SCSI subsystem initialized
libata version 3.00 loaded.
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 21, io mem 0xf721a000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 11 ports detected
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst 
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xf7219000 port 0xf7219100 irq 47
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: CT250BX100SSD1, MU02, max UDMA/133
ata1.00: 488397168 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      CT250BX100SSD1   MU02 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 8 ports detected
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Reached target Login Prompts.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Reached target Paths.
systemd[1]: Mounting Configuration File System...
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting Setup Virtual Console...
EXT4-fs (sda1): re-mounted. Opts: data=ordered
systemd[1]: Starting Set Up Additional Binary Formats...
systemd[1]: Reached target Remote File Systems.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Reached target Slices.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Configuration File System.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: Started Setup Virtual Console.
systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 174 (systemd-binfmt)
systemd[1]: Mounting Arbitrary Executable File Formats File System...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Activating swap /swapfile...
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Mounted Arbitrary Executable File Formats File System.
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Started Load/Save Random Seed.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Mounting /tmp...
systemd[1]: Mounted /tmp.
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Started udev Kernel Device Manager.
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
usb 1-1.5: new full-speed USB device number 3 using ehci-pci
systemd[1]: Started Journal Service.
Adding 3145724k swap on /swapfile.  Priority:-1 extents:9 across:102965248k SSFS
hidraw: raw HID events driver (C) Jiri Kosina
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
systemd-journald[160]: Received request to flush runtime journal from PID 1
random: nonblocking pool is initialized
ACPI: Battery Slot [BAT0] (battery present)
ACPI: AC Adapter [AC] (off-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
ACPI: Sleep Button [SBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
input: DELL Wireless hotkeys as /devices/virtual/input/input6
wmi: Mapper loaded
tsc: Refined TSC clocksource calibration: 2194.918 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa37202099, max_idle_ns: 440795206796 ns
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM] (25 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:02: registered as thermal_zone2
ACPI: Thermal Zone [TZ01] (30 C)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB_.PCI0.SBUS.SMBI) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
input: PC Speaker as /devices/platform/pcspkr/input/input7
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc90000ca6000, 44:a8:42:ed:10:14, XID 10900800 IRQ 50
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[drm] Initialized drm 1.1.0 20060810
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265D-19.ucode failed with error -2
iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265D-18.ucode failed with error -2
iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265D-17.ucode failed with error -2
iwlwifi 0000:03:00.0: loaded firmware version 16.242414.0 op_mode iwlmvm
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3234: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0:    inputs:
snd_hda_codec_realtek hdaudioC1D0:      Headset Mic=0x19
snd_hda_codec_realtek hdaudioC1D0:      Headphone Mic=0x1a
snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
usb 1-1.8: new high-speed USB device number 4 using ehci-pci
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[drm] Memory usable by graphics device = 4096M
checking generic (e0000000 410000) vs hw (e0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] ACPI BIOS requests an excessive sleep of 20000 ms, using 1500 ms instead
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: data=ordered
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
dell_laptop: Using i8042 filter function for receiving events
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
intel_rapl: RAPL package 0 domain package locked by BIOS
intel_rapl: RAPL package 0 domain dram locked by BIOS
input: Dell WMI hotkeys as /devices/virtual/input/input12
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
r8169 0000:02:00.0 enp2s0: renamed from eth0
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
media: Linux media interface: v0.10
Linux video capture interface: v2.00
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
fbcon: inteldrmfb (fb0) is primary device
uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5754)
input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.8/1-1.8:1.0/input/input13
usbcore: registered new interface driver btusb
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Bluetooth: hci0: read Intel version: 370810011003110e20
Bluetooth: hci0: Intel device is already patched. patch num: 20
psmouse serio1: synaptics: queried max coordinates: x [..5660], y [..4642]
psmouse serio1: synaptics: queried min coordinates: x [1366..], y [1298..]
clocksource: Switched to clocksource tsc
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf40223/0x840300/0x122800/0x0, board id: 2934, fw id: 1803901
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
mousedev: PS/2 mouse device common for all mice
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
fuse init (API version 7.23)
wlp3s0: authenticate with 30:b5:c2:0e:61:76
wlp3s0: send auth to 30:b5:c2:0e:61:76 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 30:b5:c2:0e:61:76 (try 1/3)
wlp3s0: RX AssocResp from 30:b5:c2:0e:61:76 (capab=0x421 status=0 aid=14)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
perf interrupt took too long (2508 > 2495), lowering kernel.perf_event_max_sample_rate to 50100
wlp3s0: authenticate with 58:6d:8f:7b:8a:85
wlp3s0: send auth to 58:6d:8f:7b:8a:85 (try 1/3)
wlp3s0: authenticated
iwlwifi 0000:03:00.0 wlp3s0: disabling HT as WMM/QoS is not supported by the AP
iwlwifi 0000:03:00.0 wlp3s0: disabling VHT as WMM/QoS is not supported by the AP
wlp3s0: associate with 58:6d:8f:7b:8a:85 (try 1/3)
wlp3s0: RX AssocResp from 58:6d:8f:7b:8a:85 (capab=0x401 status=0 aid=13)
wlp3s0: associated
wlp3s0: authenticate with 30:b5:c2:0e:61:76
wlp3s0: send auth to 30:b5:c2:0e:61:76 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 30:b5:c2:0e:61:76 (try 1/3)
wlp3s0: RX AssocResp from 30:b5:c2:0e:61:76 (capab=0x421 status=0 aid=7)
wlp3s0: associated
wlp3s0: authenticate with 58:6d:8f:7b:8a:85
wlp3s0: send auth to 58:6d:8f:7b:8a:85 (try 1/3)
wlp3s0: authenticated
iwlwifi 0000:03:00.0 wlp3s0: disabling HT as WMM/QoS is not supported by the AP
iwlwifi 0000:03:00.0 wlp3s0: disabling VHT as WMM/QoS is not supported by the AP
wlp3s0: associate with 58:6d:8f:7b:8a:85 (try 1/3)
wlp3s0: RX AssocResp from 58:6d:8f:7b:8a:85 (capab=0x401 status=0 aid=6)
wlp3s0: associated
wlp3s0: authenticate with 30:b5:c2:0e:61:76
wlp3s0: send auth to 30:b5:c2:0e:61:76 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 30:b5:c2:0e:61:76 (try 1/3)
wlp3s0: RX AssocResp from 30:b5:c2:0e:61:76 (capab=0x421 status=0 aid=5)
wlp3s0: associated
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
wlp3s0: deauthenticating from 30:b5:c2:0e:61:76 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 61.246 msecs
PM: late suspend of devices complete after 16.717 msecs
r8169 0000:02:00.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 14.015 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
 cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x1
 cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
 cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 65.134 msecs
PM: early resume of devices complete after 10.726 msecs
usb usb2: root hub lost power or was reset
usb usb3: root hub lost power or was reset
iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio.
sd 0:0:0:0: [sda] Starting disk
r8169 0000:02:00.0: System wakeup disabled by ACPI
rtc_cmos 00:01: System wakeup disabled by ACPI
r8169 0000:02:00.0 enp2s0: link down
usb 1-1: reset high-speed USB device number 2 using ehci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: configured for UDMA/133
usb 1-1.5: reset full-speed USB device number 3 using ehci-pci
usb 1-1.8: reset high-speed USB device number 4 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5660], y [..4642]
psmouse serio1: synaptics: queried min coordinates: x [1366..], y [1298..]
PM: resume of devices complete after 1015.021 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
pci_bus 0000:01: Allocating resources
pci_bus 0000:02: Allocating resources
pcieport 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci_bus 0000:03: Allocating resources
pcieport 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
pcieport 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
pci_bus 0000:04: Allocating resources
pcieport 0000:00:1c.4: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
pcieport 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
pcieport 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
pcieport 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:00:1c.2: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:00:1c.4: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:00:1c.4: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:00:1c.4: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:00:1c.3: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pcieport 0000:00:1c.3: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pcieport 0000:00:1c.4: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pcieport 0000:00:1c.4: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pcieport 0000:00:1c.2: BAR 15: assigned [mem 0xdfc00000-0xdfdfffff 64bit pref]
pcieport 0000:00:1c.3: BAR 15: assigned [mem 0xdfe00000-0xdfffffff 64bit pref]
pcieport 0000:00:1c.4: BAR 14: assigned [mem 0xf0000000-0xf01fffff]
pcieport 0000:00:1c.4: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
pcieport 0000:00:1c.3: BAR 13: assigned [io  0x3000-0x3fff]
pcieport 0000:00:1c.4: BAR 13: assigned [io  0x4000-0x4fff]
pci_bus 0000:01: Allocating resources
pci_bus 0000:02: Allocating resources
pci_bus 0000:03: Allocating resources
pci_bus 0000:04: Allocating resources
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
Bluetooth: hci0: read Intel version: 370810011003110e00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
pci_bus 0000:01: Allocating resources
pci_bus 0000:02: Allocating resources
pci_bus 0000:03: Allocating resources
pci_bus 0000:04: Allocating resources
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:db:ac:2d:eb:6c
wlp3s0: send auth to 84:db:ac:2d:eb:6c (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:db:ac:2d:eb:6c (try 1/3)
wlp3s0: RX AssocResp from 84:db:ac:2d:eb:6c (capab=0x411 status=0 aid=3)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: deauthenticating from 84:db:ac:2d:eb:6c by local choice (Reason: 3=DEAUTH_LEAVING)
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 84:db:ac:2d:eb:6c
wlp3s0: send auth to 84:db:ac:2d:eb:6c (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:db:ac:2d:eb:6c (try 1/3)
wlp3s0: RX AssocResp from 84:db:ac:2d:eb:6c (capab=0x411 status=0 aid=3)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
wlp3s0: deauthenticating from 84:db:ac:2d:eb:6c by local choice (Reason: 3=DEAUTH_LEAVING)
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 62.013 msecs
PM: late suspend of devices complete after 16.642 msecs
r8169 0000:02:00.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 14.011 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
 cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x1
 cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
 cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 72.721 msecs
PM: early resume of devices complete after 6.245 msecs
usb usb2: root hub lost power or was reset
usb usb3: root hub lost power or was reset
sd 0:0:0:0: [sda] Starting disk
r8169 0000:02:00.0: System wakeup disabled by ACPI
rtc_cmos 00:01: System wakeup disabled by ACPI
r8169 0000:02:00.0 enp2s0: link down
usb 1-1: reset high-speed USB device number 2 using ehci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: configured for UDMA/133
usb 1-1.5: reset full-speed USB device number 3 using ehci-pci
usb 1-1.8: reset high-speed USB device number 4 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5660], y [..4642]
psmouse serio1: synaptics: queried min coordinates: x [1366..], y [1298..]
PM: resume of devices complete after 891.042 msecs
PM: Finishing wakeup.
Restarting tasks ... 
pci_bus 0000:01: Allocating resources
pci_bus 0000:02: Allocating resources
pci_bus 0000:03: Allocating resources
pci_bus 0000:04: Allocating resources
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
pci_bus 0000:01: Allocating resources
pci_bus 0000:02: Allocating resources
pci_bus 0000:03: Allocating resources
pci_bus 0000:04: Allocating resources
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
pci_bus 0000:01: Allocating resources
done.
Bluetooth: hci0: read Intel version: 370810011003110e00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
pci_bus 0000:02: Allocating resources
pci_bus 0000:03: Allocating resources
pci_bus 0000:04: Allocating resources
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
wlp3s0: authenticate with 84:db:ac:2d:eb:6c
wlp3s0: send auth to 84:db:ac:2d:eb:6c (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:db:ac:2d:eb:6c (try 1/3)
wlp3s0: RX AssocResp from 84:db:ac:2d:eb:6c (capab=0x411 status=0 aid=5)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready

Return To Intel Core i5-5200U System Information